Shoe Fitting - Machined EVA
This page explains all relevant features on the Shoe Fitting page of LaserCAM Prescribe for Machined EVA prescription.
Overview
- 1 Overview
- 1.1 Navigation
- 1.2 Page Layout
- 2 Page Fields
- 2.1 Orthosis Style
- 2.2 Sizing Style
- 2.3 Orthosis Size (US Foot Size)
- 2.4 Orthosis Thickness
- 2.5 Orthosis Top Width (US)
- 2.6 Plantar Grind
- 2.7 45° Cutout
- 2.8 Plantar Midfoot Width
- 2.9 Plantar Heel Width
- 2.10 Polypropylene Shoe Plate
- 2.11 Extra Soles
- 2.12 To Fit Shoe
- 2.13 Additional Options
- 3 Support
Navigation
Click Shoe Fitting from the menu to access this page in LaserCAM Prescribe.
Page Layout
Page Fields
Orthosis Style
Default Style | Available Styles |
---|---|
Full Length | Full Length |
3/4 Length | |
Sulcus Length | |
Hook/Cobra |
Orthosis Style provides a reference as to how the foot orthosis will be finished in a laboratory environment.
For Machined EVA orthoses the Orthosis Style is achieved manually, not within computer-aided design.
Full Length
A Full Length orthosis will be shaped to the selected Orthosis Size (US Foot Size) and Orthosis Top Width (US).
If Refer to Insole Template is selected from the To Fit Shoe option list then a note will be provided on the prescription to refer to this attached template.
3/4 Length
A 3/4 Length orthosis will be modified to end proximal to the MPJ's. This adjustment is often requested when footwear is narrow, or shallow distal to the MPJ's.
Please be aware of any orthosis modification option that extends distally to the MPJ's may be adversely affected by requesting the 3/4 Length option.
Sulcus Length
A Sulcus Length orthosis will be modified to end distal to the sulcus of the foot. This adjustment is often requested when footwear is narrow, or shallow distal to the sulcus.
Hook/Cobra
A Hook/Cobra orthosis will be modified to end proximal to the MPJ's. In addition, the lateral arch and centre of the heel will be removed. This adjustment is often requested when the orthosis requires fitting in a women's dress shoe (e.g. - high heeled shoe).
Sizing Style
Sizing Style defines the particular sizing classification for Machined EVA orthosis manufacture.
There are several default options, which are listed below.
Men's (Wide)
This selection denotes a Men's US sizing convention that is specific to LaserCAM Orthotics computer-aided design software.
Men's (Wide) US Foot Size | Length (mm) | Heel Width (mm) | Forefoot Width (mm) |
---|---|---|---|
4 | 235 | 56 | 82 |
5 | 241 | 58 | 83 |
6 | 248 | 59 | 86 |
7 | 254 | 60 | 88 |
8 | 264 | 63 | 90 |
9 | 271 | 65 | 93 |
10 | 280 | 67 | 96 |
11 | 286 | 68 | 98 |
12 | 296 | 69 | 102 |
13 | 304 | 72 | 105 |
14 | 312 | 74 | 107 |
15 | 320 | 76 | 108 |
16 | 328 | 78 | 112 |
17 | 336 | 79 | 114 |
Women's Athletic (Medium Width)
This selection denotes a Women's Athletic US sizing convention that is specific to LaserCAM Orthotics computer-aided design software.
Women's Athletic (Medium Width) US Foot Size | Length (mm) | Heel Width (mm) | Forefoot Width (mm) |
---|---|---|---|
4 | 215 | 45 | 72 |
5 | 225 | 48 | 75 |
6 | 232 | 49 | 77 |
7 | 241 | 51 | 80 |
8 | 249 | 54 | 83 |
9 | 257 | 55 | 86 |
10 | 267 | 56 | 89 |
11 | 275 | 59 | 92 |
12 | 283 | 60 | 95 |
13 | 291 | 63 | 97 |
Women's Dress (Narrow Width)
This selection denotes a Women's Dress US sizing convention that is specific to LaserCAM Orthotics computer-aided design software.
Women's Dress (Narrow Width) US Foot Size | Length (mm) | Heel Width (mm) | Forefoot Width (mm) |
---|---|---|---|
4 | 212 | 46 | 68 |
5 | 220 | 48 | 70 |
6 | 228 | 50 | 71 |
7 | 236 | 52 | 75 |
8 | 245 | 53 | 78 |
9 | 258 | 54 | 81 |
10 | 263 | 57 | 84 |
11 | 272 | 59 | 87 |
12 | 280 | 61 | 88 |
13 | 288 | 64 | 92 |
Orthosis Size (US Foot Size)
Orthosis Size (US Foot Size) defines the size that will be used during computer-aided design and computer-aided manufacture.
Sizing Convention | Minimum Size | Maximum Size |
---|---|---|
Men's (Wide) | 4 | 17 |
Women's Athletic (Medium Width) | 4 | 13 |
Women's Dress (Narrow Width) | 4 | 13 |
Sizing Conversion (Length)
A sizing conversion chart has been provided below to assist with LaserCAM Orthotics sizing.
Men's (Wide) | Women's Athletic (Medium Width) | Women's Dress (Narrow Width) |
---|---|---|
2.5 | 4 | 4 |
3 | 5 | 4.5 |
3.5 | 6 | 5 |
4 | 7 | 6.5 |
5 | 7.5 | 7 |
5.5 | 8 | 7.5 |
6 | 8.5 | 8 |
7 | 9 | 9 |
8 | 10 | 9.5 |
8.5 | 10.5 | 10 |
9 | 11 | 11 |
10 | 12 | 12 |
11 | 13 | 13 |
12 | - | - |
13 | - | - |
14 | - | - |
15 | - | - |
16 | - | - |
17 | - | - |
Orthosis Thickness
Orthosis Thickness specifies the thickness of a Machined EVA orthosis at it's thinnest regions. These regions are most commonly the forefoot and centre of the heel.
Default Value | Minimum Value | Maximum Value |
---|---|---|
1.5mm | 1.0mm | 10mm |
Orthosis Top Width (US)
Orthosis Top Width (US) provides a reference for the width of the Machined EVA orthosis.
The default selection mirrors the selection of Orthosis Sizing (US Foot Size).
Sizing Convention | Minimum Size | Maximum Size |
---|---|---|
Men's (Wide) | 4 | 17 |
Women's Athletic (Medium Width) | 4 | 13 |
Women's Dress (Narrow Width) | 4 | 13 |
Plantar Grind
A Plantar Grind is a manual adjustment made to the plantar surface of a Machined EVA orthosis. Material is removed from the plantar surface of the midfoot region to allow for improved shoe fit.
The depth of a Plantar Grind is greatest at the medioplantar aspect and gradually tapers to minimal depth at the lateroplantar aspect of a Machined EVA orthosis.
Default Value | Minimum Value | Maximum Value |
---|---|---|
0mm | 0mm | 16mm |
Pre-Plantar Grind
The image below shows an orthosis before a Plantar Grind has been applied.
Post-Plantar Grind
The Plantar Grind depth can be measured by a technician and material can be removed with an EVA bench grinder.
45° Cutout
A 45° Cutout is a manual adjustment made to the plantar surface of a Machined EVA orthosis.
Default Selection | Available Selections |
---|---|
None | None |
Medial | |
Lateral | |
Both |
None
No 45° Cutout is manually applied to the Machined EVA orthosis.
Medial
A 45° Cutout is manually applied to the medioplantar aspect of the Machine EVA orthosis.
Lateral
A 45° Cutout is manually applied to the lateroplantar aspect of the Machine EVA orthosis.
Both
A 45° Cutout is manually applied to the medioplantar and lateroplantar aspect of the Machine EVA orthosis.
Plantar Midfoot Width
Plantar Midfoot Width provides a reference for the manual plantar midfoot edging of a Machined EVA orthosis.
Plantar Heel Width
Plantar Heel Width provides a reference for the manual plantar heel edging of a Machined EVA orthosis.
Polypropylene Shoe Plate
A Polypropylene Shoe Plate may be requested from the material selection list.
This Polypropylene Shoe Plate will be manufactured to match the plantar profile of the Machined EVA orthosis.
Extra Soles
Extra Soles allows a user to request an additional sole be manufactured with a specific thickness and material selection.
This Extra Sole will be manufactured to match the plantar profile of the Machined EVA orthosis.
To Fit Shoe
The To Fit Shoe section has several fields that allow a user to indicate particular fitting requirements.
Brand
A laboratory may provide additional shoe brand options for quick fitting selection.
Shoe Code
A user may input a particular code that assists laboratory technicians to a particular shoe.
Refer to Insole Template
The Refer to Insole Template checkbox allows a user to quickly indicate that a template has been attached to the prescription from the Notes & Attachments page of LaserCAM Prescribe.
Shoe Provided
The Shoe Provided checkbox allows a user to quickly indicate that a shoe has been sent directly to the laboratory for reference. The orthoses will likely be placed on-hold until the shoes arrive at the laboratory.
Additional Options
The Additional Options section has several options that allow a user to indicate particular fitting requirements.
Sneaker Grind
A Sneaker Grind is a rounding of the plantar edge of a Machined EVA orthosis that allows for improved fit in certain footwear.
Pre-Sneaker Grind
Prior to manually applying a Sneaker Grind the plantar profile of the orthosis has a sharp edge. This can cause an issue during shoe fit.
Post-Sneaker Grind
After manually applying a Sneaker Grind the plantar profile of the orthosis has a rounded edge. The plantar perimeter is first ground at a 60° angle and is then rounded.
Revere Velcro Fit
A Revere Velcro Fit is a manual adjustment of a Machined EVA orthosis that involves the attachment of Velcro® strips to the plantar surface of the orthosis.