SOP: Capturing 3D Scans (iOS - Heges)

The following illustrates a standard operating procedure (SOP) for capturing 3D scans using the LaserCAM VPS, or LaserCAM VPS Negative within LaserCAM Prescribe.

Prerequisites

Active internet connection

LaserCAM Prescribe installed

LaserCAM VPS

Goals

Procedure

Connect 3D Scanner

1. Connect the provided power supply unit (PSU) to your LaserCAM VPS 3D scanner

2. Connect the USB cable into both the scanner and the USB port on your PC

3. Turn on the scanner by pressing in the red button on the side of the scanner

Configure Heges App

1. Open LaserCAM Prescribe

2. Click New Prescription

   1. You may pick any available prescription method

3. Click 3D Scans

4. Click the Devices dropdown from the top right-hand corner of the screen

5. Select iOS - Heges

Capture 3D Scan

1. Position the scanner appropriately in relation to the foot.

2. Click Scan Left Foot/Scan Right Foot → desired time delay

3. Hold the foot in a desired position and wait for the scanning process to begin

4. Allow the scanner to complete two passes (up and back)

5. A 3D scan will now appear within your left foot window in LaserCAM Prescribe

Related Articles