Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »

The following illustrates a standard operating procedure (SOP) for re-sending failed submissions using LaserCAM Prescribe.

Prerequisites

(tick) Active internet connection

(tick) LaserCAM Prescribe installed

(tick) LaserCAM Lab Code

LaserCAM Lab Code

LaserCAM Prescribe must be configured to submit files correctly. This achieved by configuring your LaserCAM Lab Code. Please contact your laboratory for this code.

Goals

  • Open Send Queue
  • Re-Send failed submissions

Procedure

Open Send Queue

  1. Open LaserCAM Prescribe

  2. Click the Send Queue icon from the top of the Start page

  3. Select the failed upload from the list and click Upload

The failed upload should now be successfully submitted to your laboratory.

  • No labels