This page explains all relevant features on the Shoe Fitting Materials page of LaserCAM Prescribe for Machined EVA prescription.
...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Navigation
Click Shoe Fitting Materials from the menu to access this page in LaserCAM Prescribe.
Page Layout
Page Fields
Orthosis Style
...
Orthosis Style provides a reference as to how the foot orthosis will be finished in a laboratory environment.
| Tip |
|---|
For Machined EVA orthoses the Orthosis Style is achieved manually, not within computer-aided design. |
Full Length
A Full Length orthosis will be shaped to the selected Orthosis Size (US Foot Size) and Orthosis Top Width (US).
| Note |
|---|
If Refer to Insole Template is selected from the To Fit Shoe option list then a note will be provided on the prescription to refer to this attached template. |
3/4 Length
A 3/4 Length orthosis will be modified to end proximal to the MPJ's. This adjustment is often requested when footwear is narrow, or shallow distal to the MPJ's.
| Note |
|---|
Please be aware of any orthosis modification option that extends distally to the MPJ's may be adversely affected by requesting the 3/4 Length option. |
Sulcus Length
A Sulcus Length orthosis will be modified to end distal to the sulcus of the foot. This adjustment is often requested when footwear is narrow, or shallow distal to the sulcus.
| Note |
|---|
Please be aware of any orthosis modification option that extends distally to the sulcus may be adversely affected by requesting the Sulcus Length option. |
Hook/Cobra
A Hook/Cobra orthosis will be modified to end proximal to the MPJ's. In addition, the lateral arch and centre of the heel will be removed. This adjustment is often requested when the orthosis requires fitting in a women's dress shoe (e.g. - high heeled shoe).
| Note |
|---|
Please be aware that the entire lateral arch will be removed when selecting Hook/Cobra. If you intend to provide lateral wedging within your orthosis then this will be adversely affected. |
Sizing Style
Sizing Style defines the particular sizing classification for Machined EVA orthosis manufacture.
There are several default options, which are listed below.
| Tip |
|---|
Our LaserCAM Orthotics sizing templates may be purchased to assist with accurate sizing. |
Men's (Wide)
This selection denotes a Men's US sizing convention that is specific to LaserCAM Orthotics computer-aided design software.
...
Women's Athletic (Medium Width)
This selection denotes a Women's Athletic US sizing convention that is specific to LaserCAM Orthotics computer-aided design software.
...
Women's Dress (Narrow Width)
This selection denotes a Women's Dress US sizing convention that is specific to LaserCAM Orthotics computer-aided design software.
...
Orthosis Size (US Foot Size)
| Warning |
|---|
Remember to size the orthosis based on both the length and the width of the foot. |
Orthosis Size (US Foot Size) defines the size that will be used during computer-aided design and computer-aided manufacture.
...
| Tip |
|---|
Est. Orthosis Length is displayed below the Orthosis Size (US Foot Size) input. It is commonly recommended that the Est. Orthosis Length be at least 25mm greater than the length of the foot. |
Sizing Conversion (Length)
A sizing conversion chart has been provided below to assist with LaserCAM Orthotics sizing.
...
Orthosis Thickness
Orthosis Thickness specifies the thickness of a Machined EVA orthosis at it's thinnest regions. These regions are most commonly the forefoot and centre of the heel.
...
| Tip |
|---|
You should consider Orthosis Thickness in conjunction with EVA Density and Patient Weight. |
Orthosis Top Width (US)
Orthosis Top Width (US) provides a reference for the width of the Machined EVA orthosis.
The default selection mirrors the selection of Orthosis Sizing (US Foot Size).
| Warning |
|---|
Not requesting a specific Orthosis Top Width (US) may result in orthosis that are too narrow, have incorrect heel cup height, heel cup depth, and poor conformation to medial and lateral longitudinal arches. |
...
Plantar Grind
A Plantar Grind is a manual adjustment made to the plantar surface of a Machined EVA orthosis. Material is removed from the plantar surface of the midfoot region to allow for improved shoe fit.
The depth of a Plantar Grind is greatest at the medioplantar aspect and gradually tapers to minimal depth at the lateroplantar aspect of a Machined EVA orthosis.
...
Pre-Plantar Grind
The image below shows an orthosis before a Plantar Grind has been applied.
Post-Plantar Grind
The Plantar Grind depth can be measured by a technician and material can be removed with an EVA bench grinder.
| Tip |
|---|
Measuring the required depth for a Plantar Grind can be difficult. The best method is to remove the existing insole from the footwear and measure the distance from the ground to the plantar midfoot region. |
45° Cutout
A 45° Cutout is a manual adjustment made to the plantar surface of a Machined EVA orthosis.
...
None
Medial
Lateral
Both
None
No 45° Cutout is manually applied to the Machined EVA orthosis.
Medial
A 45° Cutout is manually applied to the medioplantar aspect of the Machine EVA orthosis.
| Tip |
|---|
Requesting this manual adjustment really helps to improve shoe fit, especially in athletic shoes. |
Lateral
A 45° Cutout is manually applied to the lateroplantar aspect of the Machine EVA orthosis.
Both
A 45° Cutout is manually applied to the medioplantar and lateroplantar aspect of the Machine EVA orthosis.
| Tip |
|---|
We highly recommend providing a measurement of Plantar Midfoot Width to ensure that your 45° Cutout is perfectly adjusted for shoe fit. |
Plantar Midfoot Width
Plantar Midfoot Width is provides a reference for the manual plantar midfoot edging of a Machined EVA orthosis.
| Tip |
|---|
If you measure the required Plantar Midfoot Width you will experience an easier fitting experience in clinic. This is best measured using inside callipers. |
Plantar Heel Width
Plantar Heel Width is provides a reference for the manual plantar heel edging of a Machined EVA orthosis.
| Tip |
|---|
If the shoe has a removable insole you can trace this for a perfect fit. |
Polypropylene Shoe Plate
A Polypropylene Shoe Plate may be requested from the material selection list.
This Polypropylene Shoe Plate will be manufactured to match the plantar profile of the Machined EVA orthosis.
| Warning |
|---|
It is highly recommended that you attach a tracing of the removable insole within the patient's footwear. You should also tick the Refer to Insole Template option. |
Extra Soles
Extra Soles allows a user to request an additional sole be manufactured with a specific thickness and material selection.
This Extra Sole will be manufactured to match the plantar profile of the Machined EVA orthosis.
| Warning |
|---|
It is highly recommended that you attach a tracing of the removable insole within the patient's footwear. You should also tick the Refer to Insole Template option. |
To Fit Shoe
The To Fit Shoe section has several fields that allow a user to indicate particular fitting requirements.
Brand
A laboratory may provide additional shoe brand options for quick fitting selection.
Shoe Code
A user may input a particular code that assists laboratory technicians to a particular shoe.
| Info |
|---|
For example, if you are selecting Revere from the Brand list, then you will need to enter the Shoe Code. This can be found on the inside of the shoe alongside the sizing information. If your laboratory offers Revere as a brand option, then this code will allow technicians to correctly size Machined EVA orthoses for a perfect fit. |
Refer to Insole Template
The Refer to Insole Template checkbox allows a user to quickly indicate that a template has been attached to the prescription from the Notes & Attachments page of LaserCAM Prescribe.
Shoe Provided
The Shoe Provided checkbox allows a user to quickly indicate that a shoe has been sent directly to the laboratory for reference. The orthoses will likely be placed on-hold until the shoes arrive at the laboratory.
Additional Options
The Additional Options section has several options that allow a user to indicate particular fitting requirements.
Sneaker Grind
A Sneaker Grind is a rounding of the plantar edge of a Machined EVA orthosis that allows for improved fit in certain footwear.
Pre-Sneaker Grind
Prior to manually applying a Sneaker Grind the plantar profile of the orthosis has a sharp edge. This can cause an issue during shoe fit.
Post-Sneaker Grind
After manually applying a Sneaker Grind the plantar profile of the orthosis has a rounded edge. The plantar perimeter is first ground at a 60° angle and is then rounded.
| Tip |
|---|
A Sneaker Grind can be especially helpful when fitting a Machined EVA orthosis at the heel region of a shoe. |
Revere Velcro Fit
A Revere Velcro Fit is a manual adjustment of a Machined EVA orthosis that involves the attachment of Velcro® strips to the plantar surface of the orthosis.
...
Density & Colour
The Density & Colour list allows a user to select the EVA used for the manufacture of the Machined EVA orthosis.
| Note |
|---|
This material list will be specific to your laboratory. A general list has been provided below with standard EVA options provided by PodCAM Supplies. |
| Default EVA | Available EVA |
|---|---|
| Laboratory Specific | EVA 125 (White) |
| EVA 190 (Black) | |
| EVA 190 (Brown) | |
| EVA 220 (Black) | |
| EVA 220 (White) | |
| EVA 260 (Black) | |
| EVA 260 (Blue) | |
| EVA 350 (Black) | |
| EVA 350 (Brown) | |
| EVA 350 (Flesh) | |
| EVA 350 (Green) | |
| EVA 350 (Grey) | |
| EVA 350 (Pink) | |
| EVA 350 (Purple) | |
| EVA 350 (Red) | |
| EVA 350 (Yellow) | |
| EVA 400 (Blue) |
Material Specifications
We recommend to all users to manufacture using low-compression set (%) EVA.
You can view recommended EVA specifications here.
Top Cover
The Top Cover list allows a user to select the covering material that will be at the foot orthosis interface.
Second Cover
The Second Cover list allows a user to select the covering material that will be underneath the Top Cover.
Third Cover
The Third Cover list allows a user to select the covering material that will be underneath the Second Cover.
Cover Attachment
The Cover Attachment option allows a user to request from a variety of attachments options.
| Default Selection | Available Selections |
|---|---|
| Attach Covers | Attach Covers |
| Unattached | |
| Unattached (Pre-Glued) | |
| Forefoot Unattached |
Extend Cover
Forefoot
Midfoot
Heel
Full Length Plantar Cover
Top Cover Options
No PU Undercover
Round Poron Finish
Support
Search Machined EVA Prescription Guide
...