...
The centre of the heel of a 3D Printed orthosis is removed. This region may be filled with a selected material, or may be left as a void.
| Warning |
|---|
We do not recommend requesting No Fill from the material selection list as this will result in an orthosis that is prone to quick degradation. |
1st MPJ
The 1st MPJ region of a 3D Printed orthosis is removed. This region may be filled with a selected material, or may be left as a void.
| Tip |
|---|
If treating sesamoiditis keep in mind that it is important to not only off-load the sesamoids, but also to decrease the degree of MPJ dorsiflexion. You may want to consider a Morton's Extension in combination with a Poron U-Pad in cases where a decrease in motion is critical. |
2nd MPJ
The 2nd MPJ region of a 3D Printed orthosis is removed. This region may be filled with a selected material, or may be left as a void.
3rd MPJ
The 3rd MPJ region of a 3D Printed orthosis is removed. This region may be filled with a selected material, or may be left as a void.
4th MPJ
The 4th MPJ region of a 3D Printed orthosis is removed. This region may be filled with a selected material, or may be left as a void.
5th MPJ
The 5th MPJ region of a 3D Printed orthosis is removed. This region may be filled with a selected material, or may be left as a void.
Plantar Cover
A Plantar Cover is a protective covering that is applied to the plantar surface of the orthosis when an aperture is requested. A user may select a particular Plantar Cover material from the drop down list.
| Tip |
|---|
It is recommended that a Plantar Cover be requested when an Aperture is requested with a low-density material fill. This greatly improved the longevity of any low density material that is used to fill the void of an aperture 3D Printed orthosis. |
...
A Poron U-Pad is a forefoot addition that helps to decrease pressure at the location of a U-Shaped cutout. This adjustment is commonly requested to help minimise metatarsal head pressure that put patients at risk of ulceration.
The Poron U-Pad material should first be selected from the drop down list.
...
An EVA U-Pad is a forefoot addition that helps to decrease pressure at the location of a U-Shaped cutout. This adjustment is commonly requested to help minimise metatarsal head pressure that put patients at risk of ulceration.
The EVA U-Pad material should first be selected from the drop down list.
...
A modification option may also be selected. These additional modifications are performed manually in a laboratory environment.
Support
Search
...
3D Printed Prescription Guide
| Live Search | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Related Articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...