Page Comparison

...

1. Create New Prescription, or select an Active Job and click Continue

2. Click 3D Scans

3. Capture a 3D scan, or
   SOP: Capturing 3D Scans
   - Import a 3D scan from the 3D Scans page of LaserCAM Prescribe

4. Connect the USB cable into both the scanner and the USB port on your PC

5. Turn on the scanner by pressing in the red button on the side of the scanner

Configure LaserCAM VPS

1. Open LaserCAM Prescribe

2. Click New Prescription

   1. You may pick any available prescription method

3. Click 3D Scans

4. Click the Devices dropdown from the top right hand corner of the screen

5. Select LaserCAM VPS

...

Capture 3D Scan

1. Position the scanner appropriately in relation to the foot.

2. Click Scan Left Foot/Scan Right Foot → desired time delay

3. Hold the foot in a desired position and wait for the scanning process to begin

4. Allow the scanner to complete two passes (up and back)

5. A 3D scan will now appear within your left foot window in LaserCAM Prescribeclick Import and select desired 3D scan

Orientate 3D Scan

1. Click the view cube that provides a posterior heel view

2. Image Added

   Orientate the scan in the frontal plane

   Image Added

Measure Heel Bisection

1. Measure the heel bisection using the Measure Right-Angle tool

   Image Added

2. Click Clinical Measures

3. Enter your measurement in Scan Angle

Related Articles