/
SOP: Creating NC file using ViewRouter

SOP: Creating NC file using ViewRouter

The following illustrates a standard operating procedure (SOP) for creating an NC file using ViewRouter.



Prerequisites

ViewRouter installed

ViewRouter configured for your specific LaserCAM CNC System

Access to decrypted NC files

Goals

Create an NC file using ViewRouter

Procedure

Selecting Mill Configuration

  1. Open ViewRouter

  2. Click Files → Select Mill

  3. Select the appropriate MillCFG file from the list

  4. Click Accept

Load NC Files

  1. Click Job → Create Job

  2. Click the File Name box in line with Index 1

    1. This corresponds to P1 on your CNC

  3. Double click NC file from Files list

    1. This corresponds to a left or right orthosis toolpath for a specific patient

  4. Repeat as required for remaining positions

  5. Click Refresh Grid

  6. Click Close

Build NC Files

  1. Click Process → Build File

  2. Click Process

  3. Click Save

We recommend following a standard naming convention for NC files.

DDMMYYYY_A

Print Job List

  1. Click Job → View Job

  2. Click Print (Default Printer)

This job list will display a list of positions and the associated files that can be used during the placement of EVA blanks on the CNC router.

Job List

P1: 9.0 L C:\3DSCANNER\ROUTER\DECRYPTED\LCO0001_Test_EVA_DDMMYYYY_HHMM_Left.NC
P2: 9.0 R C:\3DSCANNER\ROUTER\DECRYPTED\LCO0001_Test_EVA_DDMMYYYY_HHMM_Right.NC

Related Articles

 

Related content

SOP: Machining with LaserCAM CNC Systems
SOP: Machining with LaserCAM CNC Systems
More like this
LaserCAM Orthotics - General Workflow (ECP)
LaserCAM Orthotics - General Workflow (ECP)
More like this
Laboratory User - Getting Started
Laboratory User - Getting Started
More like this
ViewRouter
More like this
Clinical User - Getting Started
Clinical User - Getting Started
More like this
SOP: How to unlock STLe and NCe files
SOP: How to unlock STLe and NCe files
More like this